Replacing The Battery; Battery Replacement - Omron CJ1W-ID Series User Manual

Machine automation controller
Table of Contents

Advertisement

6 Inspection and Maintenance
6-2

Replacing the Battery

The Battery in the NJ-series CPU Unit must be replaced periodically as preventative maintenance. (The
Battery is a backup power supply for the CPU Unit's internal clock and the variables that are retained
during power interruptions.) This section describes how to replace the Battery.
6-2-1

Battery Replacement

Purpose of the Battery
The Battery maintains the CPU Unit internal clock and the variables retained during power interruptions
while the main power supply is OFF. If the Battery is not installed or Battery voltage drops too low, the
internal clock will stop and the variables that are retained for power interruptions will be lost when the
main power supply goes OFF.
Battery Service Life and Replacement Period
Model
NJ501-
NJ301-
NJ101-
* The minimum lifetime is the memory backup time at an ambient temperature of 55°C. The typical lifetime is the
memory backup time at an ambient temperature of 25°C.
Memory Backup Time
5 yr
4 yr
3 yr
2 yr
1 yr
Additional Information
The Battery installed at the time of purchase is only for monitoring purpose to test the battery
backup function. The Battery is exhausted depending on the period from factory checking to
actual operation, thus it may not satisfy specified battery lifetime.
6-4
Approx. maximum
lifetime
5 years
5 years
5 years
NJ501-
CPU Unit
25 ° C
40 ° C
* This graphic is for reference only.
This is the value when the power ON time rate is 0% (power OFF).
Approx. minimum lifetime
1.1 years
2 years
2 years
NJ101-
CPU Unit
NJ301-
CPU Unit
Ambient temperature
55 ° C
NJ-series CPU Unit Hardware User's Manual (W500)
*
Approx. typical lifetime
5 years
5 years
5 years
*

Advertisement

Table of Contents
loading

Table of Contents