Sony SAL35F14G Service Manual page 50

1.4/35g; 35mm f1.4g

Hide thumbs Also See for SAL35F14G:

2. Adjustment Method

Move the preset ring and fix it at the fully opened position.

Set the preset ring at the open aperture position.

Adjust by rotating the aperture holding ring so that the blades of iris are just hidden within the inner diameter of aperture holding

ring.

After adjustment, apply the adhesive bond (B-10) to portions shown in Fig. 4-2-9.

Note:

Affer apply the adhesive bond (B-10), please leave it for 8 hours or more.

Assemble the lens in the state of near completion. Perform "4-2-1. Aperture Diameter Check".

Note:

Repeat "4-2-2. Aperture Diameter Adjustment" and "4-2-1. Aperture Diameter Check" until the iris tolerance meets the specifica-

tion.

SAL35F14G (1.4/35G) (35mm F1.4G)

Preset lever

Fig. 4-2-10

Aperture blades are hidden into the

edge completely.

Fig. 4-2-11

4-11