Sony SAL35F14G Service Manual page 26

Ver 1.2 2007.06
HELP16
Adhesive bond (B-40):
Grease (G-35):
Grease (G-80):
Anti-diffusion agent (A-20): J-6082-611-A
1. Apply the anti-diffusion agent (A-20) and the grease (G-35), (G-80) to the indicated portion of the fixed barrel.
2. Apply the grease (G-80) to contact zone of the torque ring B, the fixed barrel and the friction spring.
3. Apply the grease (G-80) to contact zone of the torque ring hold ring and the fixed barrel.
4. Attach the torque ring hold ring to the fixed barrel with indicated.
5. Attach the friction spring and torque ring A shown in the figure, apply the adhesive bond (B-40) to the screws and tighten them.
6. Apply the adhesive bond (B-40) to the indicated portion of torque ring hold ring.
7. Apply the grease (G-80) to contact zone of the focus operating ring and the focus operating ring guide fin.
8. Loosen the stopper screw of the scissors lever block, align the focus operating ring to the pinch lever and attach them. Tighten the
focus operating ring guide pin.
9. Tighten the stopper screw of the scissors lever block.
Apply the adhesive bond (B-40)
Apply the adhesive
bond (B-40)
Torque Ring A
Fixed Barrel
Apply the grease
(G-35)
short
long
Apply the adhesive
bond (B-40)
(Screw hole part)
Focus Operating Ring
Guide Pin
Focus Operating Ring
SAL35F14G (1.4/35G) (35mm F1.4G)
J-6082-614-A
J-6082-621-A
J-6082-625-A
Friction Spring
short
Torque Ring
Groove
Hold Ring
Focus Operating Ring Guide Pin
Scissors lever block
Apply the adhesive
bond (B-40)
Torque Ring
Hold Ring
long
short
Apply the adhesive
bond (B-40)
(Screw hole part)
Apply the grease
(G-35)
long
Torque Ring
Hold Ring
Apply the adhesive
bond (B-40)
(Screw hole part)
Focus Operating Ring
Guide Pin
Apply the grease (G-80)
Apply the grease (G-35)
Apply the anti-diffusion agent (A-20)
Torque Ring B Torque Ring A
Friction Spring
Fixed Barrel
Apply the grease (G-80)
Torque Ring
Hold Ring
Apply the grease
(G-80)
Fixed Barrel
Apply the grease (G-35)
Focus Operating Ring
Focus Operating
Ring Guide Pin
Fixed Barrel
HELP