Sony SAL35F14G Service Manual page 23

HELP13
Adhesive bond (B-40): J-6082-614-A
1. Rotarting the cam ring, affix indicated hole of the cam ring and U groove of the fixed barrel.
2. Align the notch of the fixed barrel and pin of the aperture operation plate block, attach the inner barrel.
3. Select the guide rollers fitting to the grooves of cam ring, apply the adhesive bond (B-40) to the tips of screwed portions of guide
pins, and tighten the guide pins.
Note:
• Confirm that the cam ring rotates smoothly.
• Install parts of shaded portion in the 2 group lens block.
Guide Pin
Apply the adhesive
bond (B-40)
Apply the adhesive
bond (B-40)
Guide Roller
Guide Pin
Apply the adhesive
bond (B-40)
Pin of aperture operation plate block
2 Group Lens Block
SAL35F14G (1.4/35G) (35mm F1.4G)
Notch
Fixed Barrel
Hole
Guide Roller
Notch
Guide Roller
Guide Pin
Inner Barrel
Cam Ring
U Groove
Guide Pin
Apply the adhesive
bond (B-40)
Guide Roller
Apply the adhesive
bond (B-40)
Guide Pin
Guide Roller
Apply the adhesive
bond (B-40)
Guide Pin
Guide Roller
HELP