Mantel Clearances - FireplaceXtrordinair ProBuilder 72 MV Installation Manual

Use of a Non-Combustible Mantel Below Listed Mantel Clearances
Each gas fireplace has a unique set of mantel requirements. If you wish to place a non-combustible
mantel at a lesser height than specified in this manual, it will need to meet the following requirements:

The header (the framing member above the fireplace opening) must be non-combustible.

The facing must be non-combustible and extend to the header (or mantel, whichever is greater).
The facing must also span the entire width of the mantel.

See the illustration below for additional requirements.
© Travis Industries
Installation
(for qualified installers only)
4/22/21 - 1458 PB 72 MV/GSB2/GSR2 Install
43