FireplaceXtrordinair ProBuilder 72 MV Installation Manual page 63

7 Connect the on/off switch wires (disconnected earlier) to the connectors on the back of the receiver.
-- For GSB2 appliances make sure to attach white wire to white wire, green wire to green wire.
-- For MV appliances, wire orientation does not matter.
8 Replace the dashboard.
9 Verify wires are not touching the bottom of the firebox. Adjust if necessary.
10 Install 4AA batteries into the receiver.
11 Install 3AAA batteries into the remote.
12 Sync the remote with the receiver (see syncing instructions included with remote).
13 Return the appliance to the correct configuration.
© Travis Industries
Installation
(for qualified installers only)
4/22/21 - 1458 PB 72 MV/GSB2/GSR2 Install
63