Onboard Device Configuration - American Megatrends StorTrends 2104 User Manual

Section 2 Advanced Setup,

Onboard Device Configuration

OnBoard Devices Configuration
ATI RANGE_XL PCI VGA
SI 680A IDE Controller
Legacy USB Support
Serial Port1 (Address/IRQ)
CSB6 IDE Channels Configuration
Broadcom 5704 MAC1 :
Broadcom 5704 MAC2 :
Field Description
ATI RANGE_XL PCI This field allows you to enable or disable the onboard VGA port on your StorTrends 2104
VGA NAS server. The default setting is Enabled.
SI 680A IDE Controller This field allows you to enable or disable the drive bays on the StorTrends 2104 NAS
server marked drive bay three and drive bay four. The default value for this setting is
Enabled.
Legacy USB Support Legacy USB Support refers to the USB mouse and USB keyboard support. Normally if
this option is not enabled, any attached USB mouse or USB keyboard is not available until
a USB compatible operating system is fully booted with all USB drivers loaded. When
this option is enabled, any attached USB mouse or USB keyboard can control the
StorTrends 2104 NAS server even when there are no USB drivers loaded on it. Set this
value to enable or disable the Legacy USB Support. The Optimal and Fail-Safe default
settings are Enabled.
Serial Port 1 This option specifies the base I/O port address and Interrupt Request address of serial port
(Address/IRQ) 1. The Optimal setting is 3F8/IRQ4. The Fail-Safe default setting is Disabled.
Continued
SYSTEM SETUP UTILITY
Advanced
[Enabled]
[Enabled]
[Enabled]
[3F8/IRQ4]
XXXXXXXX : XXXXXXXX
XXXXXXXX : XXXXXXXX
v02.03 (C) Copyright 1985-2003, American Megatrends Inc.
drive bay three
drive bay four
Select Screen
Select Item
+ - Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Chapter Three : AMIBIOS Setup
Cont'd
31