Ldap Settings; Configuring The Ldap Settings; Ldap Settings Description - Avaya B199 Installing And Administering

LDAP settings

Avaya Conference Phone B199 supports connection to an external phone book using the
Lightweight Directory Access Protocol (LDAP). When the LDAP feature is in the enabled state,
you can browse and use the contact information stored in a remote company directory. The LDAP
phone book is available in the Dialpad view of the phone interface.
An LDAP database can contain thousands of contacts. To facilitate the search through the
directory server, Avaya Conference Phone B199 has a built-in search function, which filters the
content from the LDAP database, based on the search parameters that you enter.
To make the LDAP phone book available, you must activate the LDAP feature by specifying the
LDAP server to connect to and the search parameters. You can configure the LDAP settings
during or after the installation of Avaya Conference Phone B199.

Configuring the LDAP settings

About this task
Configure the LDAP settings through the web interface of your Avaya Conference Phone B199.
Procedure
1. Log in to the web interface.
2. Navigate to the LDAP tab.
3. Choose the parameter that you want to configure and proceed to the options available.
4. Click Save.
The phone restarts the application to apply the changes.

LDAP settings description

The following table lists the LDAP settings of Avaya Conference Phone B199 available through
the web interface in the LDAP tab.
Parameter
Connection
Enable
URL
Certificate
February 2021
Description
To specify if the LDAP feature is enabled. By default it is disabled.
To specify the URL of the LDAP server host. The phone supports LDAP and
LDAP over SSL (LDAPS). URL also can contain the port that the phone
connects to.
To upload a certificate to the phone. This certificate is used for authentication
on the LDAP server.
Installing and Administering Avaya Conference Phone B199
Comments on this document? infodev@avaya.com
LDAP settings
Table continues...
59