Table of Contents
Advertisement
The value range depends on the selected Stop Day Mode. For example, if you select Day
of month as the day mode, the value range is from 1 to 31.
12. In the Stop Hour field, specify the hour to stop applying the DST offset.
13. Click Save.
Daylight Saving Time state
Check the Daylight Saving Time state on the status page. The following options are available:
• On shows that the DST is active. This happens when you configure a UTC timezone, enable
Custom DST, and the current date is between the DST start day and DST stop day. In this
case, you can add the offset to the current time.
• Off demonstrates that the DST is not active. This happens when you configure a UTC
timezone with the Custom DST disabled, or the current date is not between the DST start
day and DST stop day. In this case, you cannot add the offset to the current time.
• Auto means that there is a Geo timezone set, and the phone ignores the Custom DST
settings. In this case, the DST settings are managed automatically.
• Unknown shows that the required information is currently unavailable. You must refresh the
page and check it later.
Minute offset
B199 Conference Phone supports the minute offset of the specified UTC time zone. You can set
the UTC time zone offset to 0, 15, 30, or 45 minutes.
Configuring the minute offset through the web interface
About this task
Use this procedure to configure the minute offset through the web interface.
Procedure
1. Log in to the web interface.
2. Click Phone.
3. In the Time and Region section, disable Geo Timezone (auto DST).
4. In the Timezone field, configure the following:
a. In the first drop-down list, select the UTC time zone.
b. In the second drop-down list, select the minute offset for the specified UTC time zone.
5. Click Save.
February 2021
Installing and Administering Avaya Conference Phone B199
Comments on this document? infodev@avaya.com
Phone settings
43
Hide quick links:
Advertisement
Table of Contents
