Removing Bluetooth Pairing - Avaya B199 Installing And Administering

Tip:
Tap Cancel to cancel pairing, for example, if you do not want to make the phone
discoverable. In this case, you return to the Bluetooth menu.
2. On your Bluetooth device, find B199 Conference Phone in the list of devices available for
Bluetooth connection and tap the phone name.
B199 Conference Phone establishes the connection with the Bluetooth device and displays
the Bluetooth icon and one of the following messages:
• If B199 Conference Phone retrieves the device name from your Bluetooth device, it
displays Connected to <your Bluetooth device name>. For example,
Connected to My Smartphone.
• If B199 Conference Phone does not retrieve the device name from your Bluetooth
device, it displays Connected to <your device Bluetooth address>. For
example, Connected to 00:11:22:33:FF:EE.
Note:
B199 Conference Phone is not visible in the Avaya
while the conference phone and the Bluetooth device are in the connected state.
Related links
Phone settings description

Removing Bluetooth pairing

About this task
Use this procedure to remove the pairing between Avaya Conference Phone B199 and your other
Bluetooth device to delete unwanted pairings.
B199 Conference Phone also deletes the Bluetooth pairing information when you reset the phone
to factory settings or perform system recovery.
Note:
Removing Bluetooth pairing as described below does not affect Avaya
pairing information.
Before you begin
Ensure that B199 Conference Phone and the Bluetooth device are in the paired state.
Procedure
1. Tap Settings > Bluetooth > Remove pairing.
The phone displays the following question: Do you want to remove all Bluetooth
pairing information from the phone?
2. To confirm that you want to delete the Bluetooth pairing information, tap Ok.
February 2021
on page 35
Installing and Administering Avaya Conference Phone B199
Comments on this document? infodev@avaya.com
Bluetooth connection
®
Conference Assistant application
®
Conference Assistant
93