Deleting Conference Groups; Delete All Conference Groups; Conference Guide Settings - Avaya B159 User Manual

Avaya B159 Conference Phone

DELETING CoNfERENCE GRoUPS


Select MENU > CoNf GUIDE > ERASE GRoUP.

Mark the group you want to delete and press oK.

Confirm that you really want to delete the group by pressing oK or cancel the dele-
tion of a group by pressing C.

DELETE ALL CoNfERENCE GRoUPS


Select MENU > CoNf GUIDE > ERASE ALL.
 Confirm that you really want to delete all groups by pressing oK or cancel the dele-
tion of all groups by pressing C.

CoNfERENCE GUIDE SETTINGS

When a multi-party call is going to be connected, a special signal (flash or R-pulse) is
produced which transmits the command (request, return and conference) to the PBX. It
may be necessary to change the type of signal if calls are connected via a PBX.

Select MENU > CoNf GUIDE > SETTINGS.

Enter the command for a request for a new dialling tone and press oK to confirm.
("F" is the default setting.)

Enter the command to connect everyone to a multi-party call and press oK to
confirm. ("F3" is the default setting.)

Enter the command to return to your original call and press oK to confirm. ("F" is
the default setting.)
If you experience problems making multi-party calls
It may be necessary to change the duration of the Flash/R-pulse so that it works with
your PBX. Read "ADJUSTING FLASH/R-PULSE DURATION" on page 23.
Your PBX may not be programmed to admit multi-party calls or the procedure may be
different. Please contact your telephone administrator or service provider.
CoNfERENCE GUIDE
User Guide
15