Table of Contents
Advertisement
Related links
Device Management settings
Firmware metadata file
Firmware binary
on page 121
Configuring multiple devices
About this task
You can configure multiple Avaya Conference Phone B199 devices using the configuration file as
a management tool instead of configuring the settings on each phone individually. For this
purpose, you need to export the configuration file, edit the settings as necessary, and then place
the configuration file to the provisioning server.
Before you begin
Ensure that you or the service provider have configured the provisioning server for your phones.
Procedure
1. Log in to the web interface.
2. Export the configuration file by clicking Export Configuration on the Provisioning tab.
The phone generates the global configuration avayab199.xml file.
3. (Optional) Edit the configuration file using a suitable application.
Note:
The settings file might not contain some settings if they represent a default value. To
include such settings in the configuration file, you need to change them to a non-
default value using the phone interface or the web interface.
4. Upload the file to the provisioning server.
During the next Device Management configuration upgrade, the system applies the
configuration file to the phones. After the phones reboot, they all have the same settings
specified in the configuration file.
Related links
Creating the global configuration file
Configuration file
Device Management
Remote syslog server
Avaya Conference Phone B199 supports syslog protocol to allow centralized log management.
You can configure the phone so that it logs to a remote server and sends the syslog messages to
your own system or a third-party system.
February 2021
on page 113
on page 121
on page 116
on page 98
on page 108
Installing and Administering Avaya Conference Phone B199
Comments on this document? infodev@avaya.com
Provisioning on Avaya Conference Phone B199
123
Hide quick links:
Advertisement
Table of Contents
