Alcatel-Lucent OmniSwitch 6850-48 Management Manual page 122

SNMP Overview
No. Trap Name
108 healthMonCpuShutPortTrap
healthModuleSlot—The slot on which anomaly is detected.
ifIndex—The port on which anomaly is detected.
healthModuleCpuLatest—The average module-level CPU utilization over the latest sample period (percent).
109 arpMaxLimitReached
110 ndpMaxLimitReached
111 ripRouteMaxLimitReached
112 ripngRouteMaxLimitReached
113 aaaHicServerTrap
aaaHSvrIpAddress—The HIC/Rem/WebDL server's IP address.
114 alaErpRingStateChanged
alaErpRingId—The unique Ring identifier.
alaErpRingState—The current state of the Ring (0=Idle, 1=Protection).
115 alaErpRingMultipleRpl
alaErpRingId—The unique Ring identifier.
116 alaErpRingRemoved
alaErpRingId—The unique Ring identifier.
page 3-36
Objects
healthModule-
Slot
ifIndex
healthMod-
uleCpuLatest
none
none
none
none
aaaHSvrIpAd-
dress
alaErpRingId
alaErpRingState
alaErpRingId
alaErpRingId
OmniSwitch AOS Release 6 Switch Management Guide
Family Description
health This trap is sent when port is shut
down because of a CPU spike.
ip This trap is sent when the hard-
ware table has reached the
maximum number of entries sup-
ported. The OS6400 will not
generate new ARP request for
new nexthops.
ipv6 This trap is sent when the hard-
ware table has reached the
maximum number of entries sup-
ported. The OS6400 will not
generate new ARP request for
new nexthops.
rip This trap is sent when the RIP
database reaches the supported
maximum number of entries.
When the maximum number is
reached, RIP discards any new
updates.
ripng This trap is sent when the RIPng
database reaches the supported
maximum number of entries.
When the maximum number is
reached, RIPng discards any new
updates.
aaa This trap is sent when the HIC
server is down.
erp This trap is sent when the ERP
Ring State has changed from
"Idle" to "Protection".
erp This trap is sent when multiple
RPLs are detected in the Ring.
erp This trap is sent when the Ring is
removed dynamically.
Using SNMP
September 2009