Alcatel-Lucent OmniSwitch 6850-48 Management Manual page 112

SNMP Overview
No. Trap Name
67 alaVrrp3TrapProtoError
alaVrrp3TrapProtoErrReason
68 alaVrrp3TrapNewMaster
alaVrrp3OperMasterlpAddrType—This specifies the type of alaVrrp3OperMasterlpAddr in this row.
alaVrrp3OperMasterlpAddr—The master switch's real (primary for vrrp over IPv4) IP address. This is the Ip
address listed as the source in the advertisement last received by this virtual switch. For IPv6, a link local
address.
alaVrrp3TrapNewMasterReason—This indicates the reason for NewMaster trap.
69 gmHwMixModeSubnetRuleTable-
OverloadAlert
gmSubnetRuleTable—Overloaded HW subnet rule table.
gmOverloadRuleSlice—Overloaded slot Id.
Note: This trap is not supported.
70 pethPwrSupplyConflict
pethSourceSlot—Slot number of generating entity.
71 pethPwrSupplyNotSupported
pethSourceSlot—Slot number of generating entity.
72 lpsPortUpAfterLearningWindowEx-
piredT
lpsTrapSwitchName—The name of the switch.
lpsTrapSwitchSlice—The slot number for the LPS port on which the violation occured
lpsTrapSwitchPort—The port number for the LPS port on which the violation occured
systemServicesDate—The current System Date in the following format: MM/DD/YYYY.
systemServicesTime—The current System Time in the following format: HH:MM:SS.
page 3-26
Objects
alaVrrp3TrapPr
otoErrReason
—This indicates the reason for protocol error trap
alaVrrp3OperM
asterlpAd-
drType
alaVrrp3OperM
asterlpAddr
alaVrrp3TrapNe
wMasterRea-
son
gmSubnetRule-
Table
gmOverloadRu-
leSlice
pethSourceSlot
pethSourceSlot
lpsTrapSwitch-
Name
lpsTrapSwitch-
Slice
lpsTrapSwitch-
Port
systemServices-
Date
systemServices-
Time
OmniSwitch AOS Release 6 Switch Management Guide
Family Description
vrrp The error trap indicates that the
sending agent has encountered
the protocol error.
.
vrrp The newMaster trap indicates
that the sending agent has transi-
tioned to Master state.
vlan A subnet overload trap occurs in
mixed mode whenever a new
entry to the HW subnet rule table
gets dropped due to the overload
of the table.
chassis This trap is sent when there is a
power supply conflict in a POE
device.
chassis This trap is sent when the power
supply is not supported.
bridge This trap is sent when an LPS
port joins or is enabled after the
Learning Window is expired, dis-
abling the MAC address learning
on the port.
This trap is also generated at the
time the Learning Window
expires, with a slice and port
value of 0.
Using SNMP
September 2009