TCS PUK Series Product Information page 10

1 Initiate
Power supply and control unit
press shortly
2a Programming via voice communication
or
establish voice communication
to the front-door station
2b Alternatively: programming via floor push button
+
Press floor push button 2 times in
quick succession, each time a ring
tone sounds
3 End
Power supply and control unit
press short LED is ON
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station.
The programming lock can only be removed with the Service Device TCSK-01.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129  Mail: info@tcsag.de
LED blinks
press button shortly
press button shortly
Repeat the steps, until all bell buttons are programmed
10
programming mode of the system is ON
... a ring tone sounds at the front-door
and indoor station
(if the indoor station is not accessible)
... a ring tone at the front-door station
and a ring tone at the indoor station
sounds
Programming mode of the system is OFF
1)
1)
Subject to technical changes.
PI_PUK-uk 1 A
11/2012