Reducing Blurring Of Images - Ricoh Pentax K-3 III Operating Manual

Adjusting the Texture
The texture and surface details of an
image can be adjusted in the range of
-4 to +4.
Make settings in [Clarity] of the A6
menu.
Enhancing the Skin Tone
The skin tone of portraits can be
enhanced.
Make settings in [Skin Tone] of the
A6 menu.
Determines the skin tone of the subject by the Face
Detection function, and creates a natural-looking skin
Type 1
tone. (The skin tone is enhanced only when a face is
detected.)
Softens the entire image, and makes skin
Type 2
irregularities less noticeable.
A6
By using the built-in Shake Reduction unit of the camera,
Clarity
blurring of images can be reduced.
Press 5 or use [Shake Reduction]
of the A7 menu to turn on and off
this function.
Cancel Cancel OK OK
A6
Skin Tone
Adjusts the hue and lightness of
the skin based on the detected face.
Type 1
Type 2
Off
Cancel Cancel OK OK
In B mode, select [On] or [Off].
t Memo
• [Shake Reduction] is fixed to [Off] in the following situations.
• To not turn [Shake Reduction] off while [Self-timer] or
• You can set the camera operation when 5 is pressed in
u Caution
• The operating noise of the Shake Reduction unit may be

Reducing Blurring of Images

Automatically switches between the normal Shake
Auto Reduction function and the Shake Reduction
function specialized for panning.
Turns on the Shake Reduction function specialized
Panning
for panning a slowly moving subject.
Off Turns off the Shake Reduction function.
• In M mode
• When [Drive Mode] is set to [Mirror Lock-up Shooting],
[Self-timer], or [Remote Control] in the A4 menu
• While [Pixel Shift Resolution] of the A4 menu is used
[Remote Control] of [Drive Mode] in the A4 menu is used,
set [Auto Shake Reduction Off] to [Disable Auto SR Off] in the
A7 or B7 menu.
[Shake Reduction] of [Fx Button] in the E2 menu. (p.103)
recorded during movie recording.
A7 / B7
Shake Reduction
Applies Shake Reduction to match
camera conditions.
Auto
Panning
3
Off
Cancel Cancel OK OK
83