Using The Smart Function - Ricoh Pentax K-3 III Operating Manual

Using the Smart Function

You can quickly change the settings for the five registered
functions while looking through the viewfinder or displaying the
Live View.
By default, the following functions can be set.
Function Setting Description
Switches between the settings of [AF
User AF Mode], [AF Active Area], and [Hold AF
Status] specified in advance.
E-Dial Changes the exposure value.
Switches between the drive modes of
Drive
[Drive] in [Drive Mode] specified in advance.
Switches between the settings of [Crop] in
Crop
the A5 menu.
Switches between the display patterns
specified in advance in [Viewfinder Screen]
of [Viewfinder Display] when shooting with
Grid
the viewfinder.
Guide
Changes the type of grid displayed on the
Live View screen when shooting with Live
View.
1
Press U, and then turn
R.
The function selection changes.
The icons of the settable
functions appear in the viewfinder
and on the LCD panel.
The icon of the selected function
blinks.
The operation guide is displayed
on the status screen and Live
View.
Available operations
Page
U
M
p.60
2
p.50
Turn V.
p.66
The setting for the selected
function changes.
p.48
t Memo
p.107
• The functions set with the Smart Function can be changed in
p.108
[Smart Function] of the E2 menu. (p.106)
• The setting of the last selected function can be changed with
V in the standby mode.
User AF User AF
Current Settings Current Settings
Starts/ends changing the settings.
Resets the function setting to the default
setting.
1
OK OK
19