Error Messages - Ricoh Pentax K-3 III Operating Manual

Hide thumbs Also See for Pentax K-3 III:
Table of Contents

Advertisement

Error Messages

Error Message
The memory card is full and no more
Memory card full.
images can be saved. Insert a new
memory card or delete unwanted files.
There are no images that can be played
No image.
back on the memory card.
You are trying to play back an image in a
This image cannot be
format not supported by this camera. You
displayed.
may be able to play it back on a computer.
There is no memory card inserted in the
No card in the camera.
camera.
The memory card has a problem, and
image capture and playback are
Memory card error.
impossible. You may be able to play back
or recover the images on a computer.
The memory card you have inserted is
unformatted or has been previously used
Card is not formatted.
on another device and is not compatible
with this camera. Use the card after
formatting it with this camera.
The write-protect switch on the memory
Card is locked.
card you have inserted is locked. (p.135)
A memory card not compatible with this
This card cannot be used.
camera is inserted.
This image cannot be
You are trying to magnify an image that
magnified.
cannot be magnified.
Not enough battery power
remaining to activate Pixel
Mapping.
The battery level is too low to perform
Not enough battery power
[Pixel Mapping] or [Sensor Cleaning] of
remaining to clean sensor.
the D6 menu, or to update the firmware.
Install a fully charged battery.
Not enough battery power
remaining to update the
firmware.
Not enough battery power
The battery level is too low to perform
remaining to provide USB
[USB Power Supply to Ext.] of the D5
power supply.
menu. Install a fully charged battery.
Unable to update firmware.
The firmware cannot be updated. The
There is a problem with the
update file is damaged. Try downloading
firmware update file.
the update file again.
Description
Error Message
The maximum folder number (999) is
Image folder cannot be
being used, and no more images can be
created.
saved. Insert a new memory card or
format the card.
The image could not be saved because of
Unable to store image.
a memory card error.
The operation failed. Try the operation
Data process failed.
again.
There are no images with which RAW
No image can be
images can be developed or Cross
processed.
Processing settings can be saved.
You are trying to perform
functions for the images captured using
other cameras or perform [Resize] or
This image cannot be
[Cropping] for the minimum file-size
processed.
images, or the maximum number of digital
filters that can be applied to an image is
reached.
You are trying to perform a playback
This function cannot
function that cannot be performed for
process multiple images
multiple images on the folder display
as a batch.
screen or shooting date display screen.
This function is not
You are trying to set a function that is not
available in the current
available with the currently selected
mode.
capture mode.
The camera will turn off because its
The camera will turn off to
internal temperature is too high. Leave
prevent damage from
the camera turned off until it has had time
overheating.
to cool down before turning on the
camera again.
Turn the lens zoom ring to
Images cannot be taken when a
the position where
retractable lens is attached and is not
shooting is possible.
extended. (p.46)
Description
C
menu
7
125

Advertisement

Table of Contents
loading

This manual is also suitable for:

R03010

Table of Contents