Ricoh Pentax K-3 III Operating Manual page 88

Selecting Multiple Images
When multiple images are displayed, you can select images
and execute the playback functions for them.
1
Press F or H in Step 1 of "Displaying
Multiple Images" (p.85).
The C menu or playback function selection screen is
displayed.
2
Use AB to select a
4
function, and press E.
3
Select images to execute
the function for.
Available operations
Moves the selection frame.
ABCD
Confirms/cancels the selection of the
E
image.
Specifies the start and end points for
J
image selection range.
Shows the selected image in the single
R
image display.
Use Q to show a different image.
4
Press G.
The confirmation screen appears.
5
Select [Execute] and press E.
86
File Management File Management
Delete Delete
Cancel Cancel OK OK
01/01/2021 01/01/2021
10:00 10:00 100-0019 100-0019
Execute Execute
t Memo
• You can execute the function for the images selected
individually along with the images selected by specifying the
range.
• Refer to the following pages for details on each function.
• Delete (p.88)
• Protect (p.89)
• Image Copy (p.90)
• File Transfer (p.90)
• RAW Development (p.92)
• When a function that cannot be executed for multiple images
is selected in Step 2, the selected function is applied to the
image with the selection frame.
• When [File Transfer] is selected in
Step 2, you can select [Transfer
Reservation] or [Cancel
Reservation]. Select [Transfer
Reservation] to select the format of
transferred files and make a
transfer reservation. Select [Cancel
Reservation] to cancel the transfer reservation for all images.
File Transfer
Transfer Reservation Transfer Reservation
Cancel Reservation Cancel Reservation
Cancel Cancel OK OK