Setting The Autofocus When Shooting With Live View - Ricoh Pentax K-3 III Operating Manual

AF Point Tracking in AF.C
You can set the method for tracking AF points when the
autofocus mode is set to [Continuous AF].
Tracks AF points using AF sensor and AE sensor
Type 1
information.
Type 2 Tracks AF points using AF sensor information only.
3
Subject Recognition
You can make settings so that the recognized subject is
prioritized while autofocusing when [AF Active Area] is set to
[Auto Area] or [Zone Select].
Catch-in Focus
You can perform Catch-in Focus shooting. The shutter is
released automatically when the subject comes into focus.
Use a manual focus lens or a lens with the v/w switch set
to w.
1
Attach a manual focus lens to the camera.
2
Set the focus method to v.
3
Set [Catch-in Focus] to [On] in [AF with
Viewfinder] of the A1 menu.
4
Place the camera on a fixed support such as
tripods.
5
Adjust the focus to the position where the
subject may pass and press 0 fully.
When the subject comes into focus at the specified position,
the shutter is released automatically.
62
Setting the Autofocus when
Shooting with Live View
You can set the autofocus operation when shooting with Live
View in [AF with Live View] of the A1 or B1 menu.
A1 Menu
AF with Live View
AF Active Area
Focus Peaking
Contrast AF Options
Face Detection
t Memo
• The [AF Active Area] setting can be changed by pressing b
and then turning R. (p.63)
A1 / B1
B1 Menu
AF with Live View
AF Active Area
Movie Mode AF
Focus Peaking