Ricoh Pentax K-3 III Operating Manual page 28

Item
AF Assist Light
1
B2 Exposure Setting
AE Metering
Link AE and AF Point
B3 White Balance Settings
White Balance
Auto Adjust. for Source
AWB in Tungsten Light
B4 Shooting Settings
Remote Control
B5 Movie Capture Settings
Memory Card Options
Recorded Pixels
Framerate
Recording Sound Level
Wind Noise Reduction
Headphone Volume
B6 Image Process Settings
Custom Image
Digital Filter
D-Range
Correction
B7 Shooting Assist
Shake Reduction
26
Illuminates the assist light when autofocusing in dark
locations.
Selects the part of the sensor to use for measuring
brightness and determining the exposure.
Sets whether to link the exposure value and the AF point in
the focusing area.
Sets the white balance according to the light source.
Automatically fine-tunes the white balance when the light
source is specified.
Sets the tungsten light color tone when the white balance is
set to [Auto White Balance].
Sets whether to use the remote control function.
Selects one of the memory cards inserted in the SD1 and
the SD2 slots for recording movies.
Sets the number of recorded pixels of the movie.
Sets the number of framerate of the movie.
Sets the sound volume level for recording.
Reduces wind noise.
Sets the sound volume when a headphone is connected.
Sets the image finishing tone including color and contrast.
Applies a digital filter effect when recording movies.
Expands the dynamic range and prevents overexposed
Highlight Correction
areas from occurring.
Expands the dynamic range and prevents underexposed
Shadow Correction
areas from occurring.
Activates the Shake Reduction function.
Function Default Setting Page
On p.60
Multi-segment p.59
Off p.59
Auto White
p.74
Balance
Off
p.75
High
Off p.73
p.48
SD1
z
30p
Auto p.49
On
20
Bright p.78
Off p.79
Auto
p.80
Auto
On p.83