Ricoh Pentax K-3 III Operating Manual page 112

Warning Display
You can set whether to display the warning icon in the
viewfinder and on the LCD panel and monitor in [Warning
Display] of the E4 menu.
Displays the warning icon when the shutter
Release Lock cannot be released because there is no
Warning available space on the memory card or due
to other problems.
Displays the warning icon when the shutter
cannot be released immediately because
Release Timer
[Timer/Remote Control] is turned on in [Drive
Warning
Mode] of the A4 menu or due to other
problems.
Displays the warning icon when a function for
6 Image which the image processing takes a long
Processing time after shooting, such as [HDR Capture]
Warning and [Pixel Shift Resolution] in the A4 menu,
is enabled.
Indicator Lamps
You can set whether to light up the indicator lamps in [Indicator
Lamps] of the D3 menu.
Makes the indicator lamps blink during the
countdown for shooting with [Self-timer (12
Self-timer sec.)], [Self-timer (2 sec.)], or [Remote
Control (3 sec.)] in [Drive Mode] of the A4
menu.
Makes the indicator lamps blink during the
Remote
standby for shooting with [Remote Control] in
Control
[Drive Mode] of the A4 menu.
Lights up the indicator lamps when the GPS
GPS Unit
unit is attached to the camera.
110
E4 Sound Effects
You can set the sound volume of beep sounds in [Sound Effects
Volume] (0 to 5), and set whether to make beep sounds in
[Sound Effects Setting] of the D3 menu.
Electronic
Shutter Sound
In-focus
AE Lock
Count Down
Mirror Up
D3
Fx Button
Operation
Makes an electronic shutter sound while
shooting with [Pixel Shift Resolution] of the
A4 menu.
Makes a beep sound when the subject is
focused.
Makes a beep sound when the exposure
value is locked.
Makes a beep sound during the countdown
for shooting with [Self-timer] or [Remote
Control (3 sec.)] in [Drive Mode] of the A4
menu.
Makes a beep sound during the mirror lock-
up shooting with [Mirror Lock-up Shooting] in
[Drive Mode] of the A4 menu.
Makes a beep sound when the Fx button is
pressed, to which [One Push File Format],
[Crop], [Shake Reduction], [Auto Horizon
Correction], [Monitor Touch Operation],
[Viewfinder Light], [LCD Panel Illumination],
[Electronic Level Display], [Night Vision
Display], or [Wireless LAN Setting] is
assigned.
D3