Ricoh Pentax K-3 III Operating Manual page 53

Hide thumbs Also See for Pentax K-3 III:
Table of Contents

Advertisement

2
Turn R or Q.
When [E-Dial], [ISO Sensitivity],
or [EV Compensation] is set for
the Smart Function, turn V.
t Memo
• The exposure value can be specified in increments of 1/3 EV
steps. In [EV Steps] of the E5 menu, you can change the
adjustment steps to 1/2 EV steps.
• In L or N mode, the difference from the correct exposure is
displayed on the EV bar scale while the exposure is adjusted.
• For each exposure mode, you can set the camera operation
for when Q or R is turned or M is pressed. Make settings
in [E-Dial Programming] of the E2 menu. (p.104)
• To compensate the exposure automatically by pressing
0 halfway when the correct exposure cannot be
achieved, set [Auto EV Compensation] to [On] in the A2
menu. When you release 0, the exposure returns to the
original value.
• While shooting with Live View in L, N, or M (with the timed
exposure set) mode, the brightness of Live View changes
according to the exposure setting. To not adjust the
brightness according to the exposure setting, set [Exp.
Simulation LV] to [Off] in the D2 menu.
u Caution
• The correct exposure may not be obtained with the selected
shutter speed and aperture value when the ISO sensitivity is
fixed at a certain sensitivity. (If the ISO sensitivity is set to ISO
Auto, the correct exposure may be obtained.)
• In M mode, [Drive Mode] cannot be set to [Continuous
Shooting], [Bracketing], [Interval Shooting], or [Interval
Composite] in the A4 menu. (When the timed exposure is
set, you can select [Interval Shooting] and [Interval
Composite].)
Autofocusing Using the Touch Panel
While shooting with Live View, you can change the AF point
using the touch panel. To perform autofocus and shooting
using the touch panel, make settings in [LV Shooting Touch
AF] of the E3 menu.
Sets the AF point to the touched point.
AF Point
(Default setting)
AF
Sets the AF point to the touched point
Point+Focus
and performs autofocus.
AF
Sets the AF point to the touched point,
Point+Focus+
and performs autofocus and shooting.
Shoot
Does not use the touch panel for
Off
shooting.
3
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

R03010

Table of Contents