Setting The Autofocus When Shooting With The Viewfinder - Ricoh Pentax K-3 III Operating Manual

Setting the Autofocus when Shooting
with the Viewfinder
You can set the autofocus operation
when shooting with the viewfinder in
[AF with Viewfinder] of the A1 menu.
3
t Memo
• The [AF Mode] and [AF Active Area] setting can be changed
by pressing b and then turning Q or R. (p.60)
AF Mode
1
Press b, and then turn
Q.
Single AF
Continuous
AF
60
AF with Viewfinder
AF Mode
AF Active Area
AF Area Restriction
AF.S Setting
1st Frame Action in AF.C
Action in AF.C Cont.
250 250
1/ 1/
1600
SR
When 0 is pressed halfway and
the subject comes into focus, the
focus is locked at that position.
The AF assist light turns on as necessary.
The subject is kept in focus by
continuous adjustment while 0
is pressed halfway.
The shutter can be released even if
the subject is not in focus.
AF Active Area (AF Point)
A1
You can select the AF points.
The AF points can be selected from 41 points out of 101 points.
1
Press b, and then turn
Off
R.
Auto Area
Zone Select
Select
Expanded
Area AF (S)
5.6 5.6
F F
9999 9999
9999 9999
Expanded
Area AF (M)
1/ 1/ 250 250
1600
SR
Automatically selects the optimum
focusing points out of all AF points.
Automatically selects the optimum
focusing points out of the selected
21 AF points.
Sets the AF points to the user
selected five points.
Sets the AF points to the user
selected five points.
When the subject happens to move
out of the selected AF points after
being focused, 16 peripheral points
are used as back-up points for
autofocus.
This setting is available only with
[Continuous AF].
Sets the AF points to the user
selected five points.
When the subject happens to move
out of the selected AF points after
being focused, 60 peripheral points
are used as back-up points for
autofocus.
This setting is available only with
[Continuous AF].
5.6 5.6
F F
9999 9999
9999 9999