Ricoh Pentax K-3 III Operating Manual page 25

Item
AF Assist Light
A2 Exposure Setting
AE Metering
Face Priority AE
Link AE and AF Point
ISO Auto Upper Limit Sets the ISO sensitivity upper limit for ISO Auto.
ISO Auto Lower Limit Sets the ISO sensitivity lower limit for ISO Auto.
Min. Shutter Speed
ISO Sensitivity Op.
Setting
ISO Auto with Min.
Speed
Minimum Shutter
Speed
Flash Mode
Program Line
Auto EV Compensation
A3 White Balance Settings
White Balance
Auto Adjust. for Source
AWB in Tungsten Light
A4 Shooting Settings
Drive
Drive Mode
Timer/Remote
Control
Function
Illuminates the assist light when autofocusing in dark
locations.
Selects the part of the sensor to use for measuring
brightness and determining the exposure.
Adjusts the exposure value by giving priority to the detected
faces when [AE Metering] is set to [Multi-segment].
Adjusts the exposure value according to the brightness of
the AF point.
Sets whether to set the minimum shutter speed
automatically or manually.
Sets how to increase the sensitivity.
Sets the shutter speed at which the ISO sensitivity is increased
when [Min. Shutter Speed Op.] is set to [Shutter Speed Control].
Sets the flash mode.
Selects the Program Line setting.
Automatically compensates the exposure when the correct
exposure cannot be achieved with the current settings.
Sets the white balance according to the light source.
Automatically fine-tunes the white balance when the light
source is specified for the white balance setting.
Sets the correction level for tungsten light when the white
balance is set to [Auto White Balance].
Selects the drive mode.
Sets whether to use the self-timer and remote control
functions.
Default Setting Page
On p.60
Multi-segment p.59
On p.59
Off p.59
6400
100
Auto
p.57
Standard
1/125
Flash On or
Auto Flash p.77
Discharge
Standard p.52
Off p.51
Auto White
p.74
Balance
Off
p.75
High
Single Frame
p.66
Shooting
Off p.73
23
1