Ricoh Pentax K-3 III Operating Manual page 55

Advanced Mode
When [HYPER P/Sv Options] of [E-Dial Programming] is set
to [Advanced] in the E2 menu, you can use the "advanced
mode" in G or H mode. (p.105) To use the hyper mode in
other exposure modes, assign the hyper mode function to
dials in [E-Dial Programming] of the E2 menu (p.104).
If you change the ISO sensitivity, shutter speed, and
aperture value, the camera enters the hyper mode for each
item in the order in which the value is changed. When all the
ISO sensitivity, shutter speed, and aperture value are
changed, the camera enters the hyper L mode. Press M
to return to the exposure mode set with the mode dial.
Exposure ISO Operation Hyper
Mode Sensitivity 1 Mode
Aperture
J
value
AUTO
Shutter
I
speed
G
Aperture
J
value
Fixed
value
Shutter
I
speed
Aperture
J
value
Fixed
H
value
Shutter
I
speed
Aperture
AUTO K
value
I
Fixed Aperture
L
value value
Shutter
AUTO K
speed
J
Fixed Shutter
L
value speed
ISO
AUTO
K L
sensitivity
Example) In G mode with ISO Auto
• G  (Change the aperture value)  Hyper J mode 
(Change the shutter speed)  Hyper K mode 
(Change the ISO sensitivity)  Hyper L mode
Operation Hyper Operation Hyper
2 Mode 3 Mode
Shutter ISO
K L
speed sensitivity
Aperture ISO
K L
value sensitivity
Shutter
L
speed
Aperture
L
value
Shutter
L
speed
Aperture
L
value
ISO
L
sensitivity
ISO
L
sensitivity
Bulb Exposure
1
Set the mode dial to M.
2
Use R to set the aperture
value.
3
To enable the timed exposure, press M, and
then turn Q to set the exposure time.
You can set the exposure time within the range from 1" to
20'00".
4
Press 0.
While 0 is pressed, the exposure continues.
If the timed exposure is enabled in Step 3, the exposure
ends when the set exposure time elapses after 0 is
fully pressed.
t Memo
• You can start and end the exposure also by pressing 0.
Make settings in [Bulb (B) Mode Options] of the E5 menu.
While 0 is pressed, the exposure
Bulb
continues. (Default setting)
The exposure starts when 0 is pressed
Time
and ends when 0 is pressed again.
• During the bulb exposure, [Shake Reduction] is fixed to [Off] in
the A7 menu.
• When performing the bulb exposure, use a tripod and mount
the camera on it securely. The use of the optional cable
release is recommended.
u Caution
• In M mode, [Drive Mode] cannot be set to [Continuous
Shooting] or [Bracketing] in the A4 menu.
• When the timed exposure is not set, [Drive Mode] cannot be
set to [Interval Shooting] or [Interval Composite] in the A4
menu.
Bulb Bulb 5.6 5.6
F F
1600 1600
SR
3
9999 9999
9999 9999
53