Changing The Image Size - Ricoh Pentax K-3 III Operating Manual

5
Select [SD1] or [SD2], and press E.
6
Select [Continue] or [Finish], and press E.
When [Continue] is selected, the screen of Step 3
reappears.
u Caution
• [RAW Development] can be executed only for RAW images
captured with this camera.
• The RAW images captured when [Drive Mode] is set to [Multi-
exposure] or [Interval Composite] in the A4 menu are
developed according to the [Lens Correction] setting used
during shooting. The [Lens Correction] setting cannot be
changed when developing the RAW images.
t Memo
• When [RAW Development] is executed from the multi-image
display screen, folder display screen, or shooting date display
screen, a new folder is created, and the images are stored in
it.
• For [Digital Filter], [Clarity], [Skin Tone], [HDR Capture], and
[Pixel Shift Resolution], the setting item of which parameters
can be changed varies depending on the item used during
shooting. For the RAW images captured using [HDR Capture]
or [Pixel Shift Resolution], you cannot change the parameters
of [Digital Filter], [Clarity], and [Skin Tone] when developing
the RAW images.
• With the provided software "Digital Camera Utility 5", you can
develop RAW images on a computer. (p.98)

Changing the Image Size

u Caution
• Images already resized or cropped to the minimum file size
cannot be processed.
Changing the Number of Recorded Pixels
(Resize)
You can change the number of recorded pixels of the selected
image, and save it as a new file.
1
Display the image to edit in the single image
display.
2
Select [Resize] in the
playback function selection screen.
The [Resize] screen appears.
3
Use AB to select the
number of recorded pixels
and press E.
You can select an image size
smaller than that of the original
image.
The save confirmation screen appears.
4
Select [SD1] or [SD2], and press E.
u Caution
• [Resize] can be executed only for JPEG images captured
with this camera.
C
5 menu or on the
C
Resize Resize 4752x3168 4752x3168
Cancel Cancel
5
4
Save Save
93