Ricoh Pentax K-3 III Operating Manual page 107

Executes the Program Shift.
Executes the Program Line.
Sets the camera to the hyper mode.
Sets the camera to the advanced
hyper mode.
Cancels the hyper mode.
Enables/Disables the timed
exposure.
Not available
6
Press E.
The screen of Step 4 reappears.
When [E-Dial] is set for the Smart Function, make the [S.Fn
Dial (E-Dial)] setting.
7
Press F.
The screen of Step 3 reappears.
Repeat Steps 3 to 7.
8
Press F three times.
t Memo
• You can check the functions assigned to each dial on the
status screen.
• When assigning a function to V, assign [E-Dial] to [Smart
Function] in the E2 menu. (p.106)
• If you select [Rotation Direction] on the screen of Step 2, you
can reverse the effect obtained by turning Q or R.
• If you select [HYPER P/Sv Options] on the screen of Step 2,
you can set the camera operation when the camera enters
the hyper mode in G or H mode.
Determines the exposure by prioritizing the last
Standard
changed shutter speed and aperture value.
Fixes the changed exposure parameters: ISO
sensitivity, shutter speed, and aperture value.
Advanced
When all parameters are changed, the camera
enters the hyper L mode.
6
105