Table of Contents
Advertisement
Chapter 9. Security and Remote Configuration
password does not match the stored password, the LCD displays
a brief message indicating that the entered password was invalid
and the top menu is displayed.
Set Password
Set Password prompts the user to enter a numeric code that will
be required for access to configuration menus from the front pan-
el. The code can be up to six digits long. The default state is noth-
ing entered in the password option.
Lock Keypad
Lock Keypad locks the front panel keypad and displays a brief
message on the LCD indicating that the front panel is locked. The
top menu is displayed after the message.
REMOTE CONFIG
Remote Config (configuration) allows an ISU to be configured or
tested over the ISDN line. A special call is made that places the an-
swer unit in remote loopback for configuration or testing. The
menu options are shown in Figure 9-2.
1=Netw. options
2=DTE options
3=CONFIG
3=Protocol
4=Quick setup
5=Security
6=Remote Config
74
1=Cfg. Rmt. Unit 2=Password <
2=Set Password Password <
3=Lpbk remote 1B Number <
4=Lpbk remote 2B Number <
ISU 2x64 Dual Port ISDN Service Unit User Manual
1=Number <
>
>
>
>
>
Figure 9-2
Remote Config Menu Tree
61200051L1-1D
Advertisement
Table of Contents
