Figure; Isu 2X64 Rear Panel - ADTRAN 1200051L1 User Manual

Dual port isdn service unit
Table of Contents

Advertisement

Chapter 1.Understanding ISDN and the ISU 2x64
The ISU 2x64 features two RS-530/EIA-232 DTE interfaces and
two RS-366 dial interfaces (see Figure 1-1). An RS-530/EIA-232-
to-V.35 adapter is available to support V.35 DTE interfaces. Syn-
chronous data transfer rates from 2400 bps to 128 kbps and asyn-
chronous rates from 1200 bps to 115.2 kbps are supported on a
single DTE interface. Synchronous data transfer rates from 2400
bps to 64 kbps and asynchronous rates from 1200 bps to 57.6 kbps
are supported when using two DTE interfaces. For speeds over 64
kbps using a single DTE interface, the industry standard BOND-
ING protocol aggregates the two 64 kbps B channels for a maxi-
mum of 128 kbps.
Dialing from the ISU 2x64 is accomplished in a variety of ways:
ISDN IFC
MAINTENANCE
2
Dialing manually from the front panel
Dialing automatically from stored numbers
Dialing through two RS-366 parallel dial interfaces (as in vid-
eo conferencing applications)
Dialing over the DTE interfaces using AT command
V.25 bis in-band dialing (used in applications such as LAN/
WAN bridging)
Dialing when DTR is asserted (some Bridge/Routers raise
DTR when bandwidth on their dedicated line is exceeded)
DTE#2
RS530A / RS232
RS366 DIALING PORT
ISU 2x64 Dual Port ISDN Service Unit User Manual
DTE#1
RS530A / RS232
RS366 DIALING PORT

ISU 2x64 Rear Panel

POWER
ON
OFF

Figure 1-1

61200051L1-1D

Advertisement

Table of Contents
loading

This manual is also suitable for:

1200051l21200051l51200051l661200051l1Isu 2x64

Table of Contents