Chapter 11. Specifications
Data Rates (DTE)
When using single DTE interface:
•
•
When using dual DTE interfaces:
•
•
B Channel Aggregation
•
•
Rate Adaptation
•
•
•
•
•
•
•
•
•
•
Interoperability
•
•
•
Switch Compatibility
•
*Only available on part numbers 1200051L5 and 1200051L6.
86
300 bps to 115.2 kbps asynchronous
2400 bps to 128 kbps synchronous
300 bps to 57.6 kbps asynchronous on each interface
2400 bps to 64 kbps synchronous on each interface
BONDING Protocol Mode 1. Used for speeds over 64 kbps
from a single DTE interface.
RFC 1717 Multilink PPP used for speeds over 57.6 kbps for a
single DTE interface.
T-Link
CCITT V.120
CCITT V.110
Clear Channel
SAP
FALLBACK
DSU 57.6 Async
BONDING mode 1
PPP Async-Sync
Multilink PPP
BONDING Mode 1-compatible Inverse Multiplexers (AS-
CEND, PROMPTUS, Teleos, etc.)
Switched-56 DSUs (2-wire and 4-wire), ISU 128s, ISDN TAs
PPP/Multilink compatible devices
AT&T 5ESS, NTI DMS-100, National ISDN-1, NEC, Euro IS-
DN*, TDX10*, TDX1B*, KDD*, NTT*, and VN4*.
ISU 2x64 Dual Port ISDN Service Unit User Manual
61200051L1-1D