Table of Contents
Advertisement
S74.......DTE STOP
S75.......DTE FLOW
S76.......DTE CLOCK
S135.....
The following are the string locations for stored numbers 0 - 9:
SS80.....SN0 LOC
SS81.....SN1 LOC
SS82.....SN2 LOC
SS83.....SN3 LOC
SS84.....SN4 LOC
SS85.....SN5 LOC
SS86.....SN6 LOC
SS87.....SN7 LOC
SS88.....SN8 LOC
SS89.....SN9 LOC
S118 = 0
S118 =32
61200051L1-1D
Selects the number of asynchronous stop bits. More
than one option can be set at the same time.
0 = 1 stop bit (default)
1 = 1.5 stop bits
2 = 2 stop bits
Selects asynchronous flow control
0 = None (default)
1 = Hardware flow. CTS from DCE controls DTE.
2 = Hardware flow. RTS from DTE controls DCE.
3 = Hardware flow. RTS and CTS flow control.
4 = Software flow. XON/XOFF from DCE controls
DTE.
8 = Software flow. XON/XOFF from DTE controls
DCE.
12 = Software flow. XON/XOFF controls DTE and
DCE.
Selects DTE connector transmit clock timing source.
0 = Internal (ISU 2x64 supplies timing) (default)
1 = External (DTE supplies timing)
Value determines whether or not the ISDN switch
should consider a DTE port busy. S23 must be pro-
grammed before this register is used.
0 = DTE port is not busy (default)
1 = DTE port is busy
Stored number 0 string
Stored number 1 string
Stored number 2 string
Stored number 3 string
Stored number 4 string
Stored number 5 string
Stored number 6 string
Stored number 7 string
Stored number 8 string
Stored number 9 string
CHAP Authentication (default)
PAP Authentication (required for MP connection with
WIN 95)
ISU 2x64 Dual Port ISDN Service Unit User Manual
Appendix D: S-Register List
117
Advertisement
Table of Contents
