Table of Contents
Advertisement
1=Netw. options
2=DTE options
3=CONFIG
3=Protocol
4=Quick setup
5=Security
6=Remote Config
Data Format (asynchronous)
A frame consists of a start bit, 7 or 8 Data bits, 0 or 1 Parity bit,
and 1 to 2 Stop bits. The settings for Data Bits, Parity Bits, and
Stop Bits are available as shown in Figure 6-19.
1=Netw. options
2=DTE options
3=CONFIG
3=Protocol
4=Quick setup
5=Security
6=Remote Config
Transmit Clock (synchronous data format)
Selecting the Normal option causes the ISU 2x64 to be the syn-
chronous DTE interface transmit timing source. Transmit data is
timed from the transmit clock provided by the ISU 2x64. With
the External option selected, the ISU 2x64 slaves to an external
transmit timing source. The external clock is provided to the ISU
2x64 by the external transmit clock signal at the DTE connector.
61200051L1-1D
1=Asynchronous
2=Synchronous
1=Bit Rate
2=Connector Type
3=RTS Options
4=CTS Options
1=Asynchronous
5=CD Options
2=Synchronous
6=DTR Options
7=DSR Options
8=Flow Control
9=Data Format
ISU 2x64 Dual Port ISDN Service Unit User Manual
Chapter 6. Configuration
1=Bit Rate
2=Connector Type
3=RTS Options
4=CTS Options
5=CD Options
6=DTR Options
1=Hardware Flow
7=DSR Options
2=Software Flow
8=Flow Control
3=No Flow Ctrl
9=Data Format
Figure 6-18
Flow Control Menu Tree
1=8 Data bits
1=Data Bits
2=7 Data bits
1=None
2=Parity Bits
2=Odd
3=Even
3=Stop Bits
1=1 Stop bit
2=1.5 Stop bits
3=2 Stop bits
Figure 6-19
Data Format Menu Tree
53
Advertisement
Table of Contents
