Toyota 30 Series Manual page 25

Inspection:
Measure the side gear thrust washer thickness.
Standard: 1.6 mm (0.063 in)
Limit: 1.3 mm (0.051 in)
Inspection:
Measure the pinion gear thrust washer thickness.
Standard: 1.6 mm (0.063 in)
Limit: 1.0 mm (0.039 in)
Reassembly:
Install the side gear thrust washer with its oil groove facing
the gear.
Reassembly:
Apply chassis grease (molybdenum disulfide grease) on
both sides of the spider pinion thrust washer before reas-
sembly.
[Point 41
Reassembly:
Apply locking agent (08833-00070) on the set bolt threaded
portion before reassembly. Tighten the set bolts gradually
in the diagonal order, and finally tighten in the circular order
to the specified torque.