Toyota 30 Series Manual page 118

DISASSEMBLY-INSPECTION-REASSEMBLY
Note:
Operate in a clean place.
As each part is finished with high precision, carefully disassemble them to prevent any damage.
Disassembly Procedure
Remove the through bolt.
1
Separate each housing.
2
Remove the O-ring, spring and check valve.
3
4 Remove the seal holder.
Remove the spring holder.
5
6 Remove the spool Wlspring.
Remove the spring. [Point I ]
7
Remove the tilt lock valve.
8
Remove the relief valve. [Point
9