Toyota 30 Series Manual page 111

Front Lift Cylinder for FV-FSV-QFV
4
*
Disassembly Procedure
1 Remove the safety down valve.
Remove the cylinder cover. [Point I ]
2
3 Remove the cover seals.
4 Remove the piston rod. [Point 21
5 Remove the piston seals.
Remove the check valve. [Point 31
6
7 Remove the cylinder. [Point 4 1
Reassembly Procedure
The reassembly procedure is the reverse of the disassembly procedure.
Note:
Apply MP grease or hydraulic oil on the packing, O-ring, and dust seal lip portion.
Apply sealant (08833-00080) on the threaded portion of the cylinder cover before tightening.
Fill the amount of hydraulic oil specified below into the cylinder from its top before installing the
cylinder cover.
Filling amount cm
FV
Cylinder cover
FVIFSVIQFV on ton series
2
FVIFSV on ton series
3
3 (in ): FVIFSV 2 ton series 100 (6.1 0)
3
FSVQFV
4
- -
T
339 407 (3455 41 47) [250
=
- -
T
420 454 (4283 4630) [310
-
-
80 (4.57 4.88)
T =
-
-