Toyota 30 Series Manual page 112

Point Operations
[Point I]
Disassem bly.Reassembly:
SST 09620-1 01 00-71
[Point 21
Inspection:
Measure the piston rod outside diameter.
2 ton series and 3 ton series:
Standard: 50.8 mm (2.0 in)
Limit: 50.72 mm (1.9969 in)
Inspection:
Measure the piston rod bend.
Limit: 2.0 mm (0.079 in)
[Point 31
Assembly:
Install the check valve so that the arrow will direct down-
ward of the front lift cylinder.
[Point 41
Inspection:
Measure the lift cylinder bore.
2 ton series
Standard: 75.0 mm (2.953 in)
Limit: 75.35 mm (2.9665 in)
3 ton series
Standard: 85.0 mm (3.346 in)
Limit: 85.40 mm (3.3622 in)