Toyota 30 Series Manual page 103

Rear Lift Cylinder for QFV Mast
Disassembly Procedure
Remove the safety down valve.
1
2 Remove the plug.
Remove the cylinder cover.
3
Remove the seals from the cylinder cover.
4
Remove the piston rod. [Point 11
5
6 Remove the piston seals.
Remove the cylinder. [Point 21
7
Reassembly Procedure
The reassembly procedure is the reverse of the disassembly procedure.
Note:
Apply MP grease or hydraulic oil on the packing, O-ring, and dust seal lip portion.
Apply sealant
(08833-00080)
on the threaded portion of the cylinder cover before tightening.