Removal*Installation - Toyota 30 Series Manual

[Point 3 1
Removal:
SST 09320-23000-71
Installation:
SST 09950-6001 0
---
09950-7001 0
---
[Point
SST 09509-55020
Installation:
Adjust the front axle hub starting force.
2. Fully tighten the bearing lock nut, and rotate the hub by
to 5 turns to run in the bearing.
3. Return the bearing lock nut by 1/12 to 116 turn (30 to
Set a spring scale on a hub bolt, and measure the start-
4.
ing force.
Standard:
-
N
25.5 72.6 (2.6
5. If the standard is not satisfied, adjust the degree of bear-
ing lock nut tightening for adjustment.
6. Install the nut lock bolt.
Coat thread tightener (08833-00070) on the nut lock bolt
before tightening.
-
kg9 Ibf]
7.4 16.3
4