Installing The Network Drivers; Autolink Auto Installation Of The 3C529 Adapter; System (Nos) - 3Com EtherLink 3C529 User Manual

Installing the Network Drivers

AutoLink Auto Installation of the 3C529
Adapter Drivers for a NetWare
Networking Operating System (NOS)
Follow these steps to install the Novell
drivers automatically if your network environment meets the
NOS requirements described in Chapter 5.
1. Make sure that you have installed and configured
the adapter, and booted the computer under DOS,
and have connected your computer to the network.
2. If the EtherDisk diskette is already in your floppy
drive, go directly to step 7. Otherwise, insert the
EtherDisk diskette in a floppy drive on your
computer.
3. Make that drive the current drive.
4. Type at the prompt:
INSTALL [Enter]
5. The first time you use the diskette to install an
adapter, a license screen appears. To accept the
terms and conditions of the 3Com end-user
software license agreement, type the following:
Y
6. Read the screen and press [Enter].
7. When the main menu screen appears, select
NetWare DOS ODI Client and press [Enter].
NOTE: AutoLink auto installation with configuration
will take several minutes.
Quick Start 9
®
®
NetWare network