3Com EtherLink 3C529 User Manual page 69

6. If you are running the Group 3 test, make sure
that the adapter is connected to a properly cabled
and inactive network and that an echo server is
set up on the network.
7. Make sure that the settings for the adapter's
options are not the same settings used in the
system or on any other adapter boards installed in
the computer.
8. Install the adapter in another slot and run the
diagnostic tests again.
The slot may be defective.
9. If you have more than one 3C529 adapter, replace
the failed adapter with a working one and run the
diagnostic tests again.
Use the same option settings as those used on the
failed adapter.
If the working adapter passes all tests, the original
adapter is probably defective. Refer to Appendix D,
"Technical Support."
10. Install the adapter in another functioning
computer and run the tests again.
Your computer may be defective. If the adapter
passes the tests in the second computer, contact the
reseller or manufacturer of the computer.
Troubleshooting 6-13