3Com EtherLink 3C529 User Manual page 24

10 Quick Start
8. Reboot the computer when the auto installation
process is finished.
NOTE: To ensure that your computer is configured with
the latest client software, ask your system administrator to
configure a 3Install account on the server.
Instructions for configuring a 3Install account are
contained in the README.TXT file located in the
\QINSTALL\SERVER directory on the EtherDisk diskette.
NOTE: The NetWare 4.x server driver for NetWare 3.11
requires that you load the 3C5X9.LAN driver along with
the following NLMs (NetWare Loadable Modules).
– LSLENH.NLM
– PATCHMAN.NLM
– MSM31X.NLM
– ETHERTSM.NLM
All of the files are located on the EtherDisk diskette.
These files must all be copied to the same subdirectory. If
you are not loading them from the SYSTEM volume, you
must supply the DRIVEID:\PATH to the location of the files.
Type in the following commands in the order shown
(X: can be any drive). LSLENH.NLM loads itself plus
PATCHMAN.NLM. 3C5X9.LAN loads itself,
MSM31X.NLM, and ETHERTSM.NLM.
LOAD X:\LSLENH [Enter]
LOAD X:\3C5X9 [Enter]
If this order is not followed, the driver will not
function correctly.
Also, if you want to use the monitor utility, use the
MONITOR.NLM file located on the EtherDisk diskette.