3Com EtherLink 3C529 User Manual page 63

2. Press [Tab] to move from field to field and high-
light any field within the Test Setup dialog box.
3. If you want to change a setting in any field, follow
these steps:
a. In the Group Select box, use the arrow keys to
select a test group.
b. In the Group X Tests box, use the arrow keys to
highlight a test. Press the [Space Bar] to enable
or disable an individual test.
c. In the Repetitions box, specify the number of
times you want to run the Group 1 tests, or use
the arrow keys to select the Continuous option.
d. In the Errors box, press the [Space Bar] to select
or deselect the Halt on Error parameter.
4. When you are satisfied with the new test setup,
highlight the <OK> command button and press
[Enter].
5. To run the tests, choose Run Tests from the Test
menu and select the <Start> command button.
For a description of these tests, refer to the on-line
help in the Configuration and Diagnostic Program.
Troubleshooting 6-7