Starting The Group 1 Tests; Main Window With Adapter Selected - 3Com EtherLink 3C529 User Manual

6-4 Troubleshooting
7. When the Configuration and Diagnostic screen
appears, select Configuration and Diagnostic
Program.
If you are testing multiple adapters, a screen displaying
multiple adapters will appear. Highlight the adapter
you want to test and press [Enter]. A screen similar to
the one shown in Figure 6-3 appears, showing your
selection.
Figure 6-3. Main Window with Adapter Selected

Starting the Group 1 Tests

The Configuration and Diagnostic Program is already set
up to run the Group 1 tests. To change the test parameters,
see the next section, "Changing the Test Setup."