3Com EtherLink 3C529 User Manual page 20

6 Quick Start
To change your computer's configuration, follow
these steps:
1. Select Set Configuration from the main menu.
The Set Configuration menu is displayed.
2. Select Change Configuration.
The program displays the computer's configuration,
which includes the settings for the adapter and the
slot it is installed in. Confirm that these are the
configuration settings you want. If you need help,
press [F1]. If you want to change the configuration
settings, use the arrow keys to select a setting and
press [F5] or [F6] to scroll through a list of the
available choices.
NOTE: If you are using an external transceiver, be
sure to set Transceiver Type to external.
3. To save your settings press [F10]. Then press
[Enter].
4. Press [F3] to return to the Set Configuration menu.
5. Press [F3] again to exit the program.
6. Remove the copy of the PS/2 Reference Diskette.
7. Press [Enter] to reboot your computer under DOS.
If you need to change the software settings for the adapter,
proceed to the section "Changing 3C529 Adapter Options."
Otherwise, go to the section "Connecting to the Network."