Installing Network Drivers - 3Com EtherLink III 3C509B-TPO Quick Start Manual

Installing Network Drivers

You must know the network operating system that your
computer runs. (Check with your network administrator if
necessary.)
If you are using the Novell
operating system with a single adapter, follow the instructions
in the next section. If the environment you are using does not
match the description above, skip to the section "To Install
Drivers in Other Environments."
To Install the Driver for a Single Adapter
You can use 3Com's AutoLink
install Novell NetWare DOS ODI client software if you:
Use the Novell NetWare 2.x, 3.1x, or 4.x network operating
system
Have only one 3C509B adapter installed
Intend to use your computer as a NetWare DOS ODI client
To use the AutoLink program to install NetWare DOS ODI
client software on a PC with a single adapter:
1 Insert the EtherDisk
2 At the command prompt, type:
INSTALL [Enter]
3 Follow the instructions displayed on the screen.
4 Remove the diskette and reboot the computer.
Installing Network Drivers
® ®
NetWare
™
auto installation feature to
®
diskette in a floppy drive.
2.x, 3.1x, or 4.x network
3