Table of Contents
Advertisement
80
C
6: G
HAPTER
ETTING
Calling Groups
M
Y
T
ORE FROM
OUR
ELEPHONE
3 Dial the hunt group password.
4 Hang up the telephone.
To log in to a dynamic hunt group using the NBX NetSet utility:
1 Go to Group Memberships > Hunt Groups.
2 Select the hunt group to which you want to log in.
3 Click Login.
If you log in to a dynamic hunt group and do not answer a call when it
rings on your telephone, the system may log you out of the group
depending on how the administrator has configured the group.
To log out of a dynamic hunt group using the NBX NetSet utility:
1 Go to Group Memberships > Hunt Groups.
2 Select the hunt group from which you want to log out.
3 Click Logout.
To log in to all hunt groups of which you are a member:
1 Go to Group Memberships > Hunt Groups.
2 Click the Login all button.
To log out of all hunt groups of which you are a member:
1 Go to Group Memberships > Hunt Groups.
2 Click the Logout all button.
One type of hunt group is the Calling Group. Calling groups allow an
incoming call to ring simultaneously on all telephones in a group, for
example, a customer service group. To log in to or out of a calling group,
follow the steps in
S
YSTEM
"Hunt Groups"
earlier in this chapter.
Advertisement
Table of Contents
