Table of Contents
Advertisement
Starting a
WhisperPage Session
More About
WhisperPage
Users (speakers) who can initiate a WhisperPage session with you
The NBX NetSet administrator can enable or disable the alert tone and
specify the Decline Time, which ranges from 0 to 9.9 seconds. For
additional tips and considerations on using WhisperPage, see
About WhisperPage"
1 Pick up the handset.
2 Press , and Feature + 426.
#
A confirmation tone prompts you to enter the WhisperPage extension.
3 Enter the extension you want to whisper to.
If the listener's telephone has a display panel, it shows the WhisperPage
attempt and your extension. Additionally, an optional tone may be played
to alert the listener.
At this point, the listener can either accept the WhisperPage request by
doing nothing, or refuse the request by activating Do Not Disturb.
If the listener accepts the WhisperPage request, after a brief delay, you
will hear a tone that tells you to begin the WhisperPage session.
4 Begin speaking. When you have finished, go off-hook to end the
WhisperPage session.
These usage tips and limitations apply to WhisperPage:
The WhisperPage listener can refuse or end a WhisperPage session at
any time by activating Do Not Disturb.
You cannot initiate a WhisperPage session to:
A Supervisory Monitoring call
A call that is on hold
While using WhisperPage, if either the listener or the other party on
the call invokes Transfer, Park, Conference, or Forward to VM, the
WhisperPage session ends.
You can start up to two simultaneous WhisperPage sessions, one or
both on hold, providing you have a line available for each session.
later in this chapter.
WhisperPage
85
"More
Advertisement
Table of Contents
