Table of Contents
Advertisement
Using a Headset
General Headset
Instructions
If your system uses a messaging application other than NBX Messaging,
use the documentation for your messaging application instead of these
instructions.
To activate the one-call-only Class of Service Override from a 3Com
Telephone:
1 Pick up the handset.
2 Press Feature + 433.
3 Dial your telephone extension and press .
4 Dial your voice mailbox password and press .
5 When you hear the dial tone, you can dial the call in the same way that
you do from your own 3Com Telephone.
When you use Class of Service (CoS) Override, any reports that are
generated on the NBX system indicate that the CoS features of your own
3Com Telephone were applied temporarily to the telephone on which
you made the call.
You can use a headset that has a microphone with any telephone on an
NBX system.
For information on how to use a typical headset and amplifier with
3Com Telephones other than the 3Com Manager's Telephone or 3102
or 3102B Business Telephone, see
later in this section.
For 3Com Telephones other than the 3Com Manager's Telephone or
3102 and 3102B Business Telephones, follow these instructions.
You may need to modify some of these instructions for some headsets or
amplifiers. See the instructions that come with your equipment.
To prepare a headset for all calls:
1 Insert the cord for the headset amplifier into the handset cord receptacle
on the underside of the telephone.
2 Insert the cord for the telephone handset into the headset amplifier.
3 Put on the headset.
4 Pick up the telephone handset and set it on your desk.
Using a Headset
#
#
"General Headset Instructions"
67
Advertisement
Table of Contents
