Table of Contents
Advertisement
Using Automatic
Callback
Initiating Automatic
Callback
More About
Automatic Callback
Automatic Callback allows you to request a call back ring from a
destination extension that is in use or unanswered. The NBX system
attempts to connect you when the called party at that extension becomes
available.
On an NBX telephone, the Automatic Callback feature is helpful when:
The person you are calling is on another call and you want the system
to generate a call back ring as soon as this person is available.
The person you are calling does not answer the call and you want the
system to generate a call back when this person is available.
You initiate an Automatic Callback through Feature code 469 or a
programmed system access button depending on the type of NBX
telephone you have and how it is configured.
You can initiate Automatic Callback while making a direct call to an
extension that is in use or unanswered.
On a 3Com Entry Telephone:
1 While on a call to an extension that is in use or unanswered, press , and
Feature + 469.
2 Disconnect from the call.
If the Automatic Callback attempt is successful, you will hear a
confirmation tone.
When the party on the destination extension becomes available, you
receive a call back ring. When you answer this call back, the
destination extension rings and your call then can be connected.
If the Automatic Callback attempt is not permitted, you will hear a
Fast Busy tone. See
If the party on the Automatic Callback destination extension does not
return your call within the time set by the Automatic Callback Return
Interval, the system cancels the Automatic Callback request. For more
information, see the
These usage tips and limitations apply to Automatic Callback:
An Automatic Callback Return Interval, set by the NBX NetSet
administrator, determines the maximum amount of time you can wait
"More About Automatic Callback"
"More About Automatic Callback"
Using Automatic Callback
in this chapter.
section.
53
#
Advertisement
Table of Contents
